This standard range of Servo-Worm Reducers are perfect for use in applications that demand high performance, precise positioning and repeatability. They were specifically developed for use with state-of-the-art servo motor technology, providing limited integration of the motor to the unit. Angular backlash of significantly less than 1 arc-a few minutes is provided standard.
They can be purchased in four sizes (50 mm to 100 mm center range) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide variety of motor couplings and installation flanges are for sale to assembly to practically all servo motors, and the hollow bore output can be utilized to mount result shafts, pinion shafts, or other drive elements.
Typical applications for these reducers include precision rotary axis drives, traveling gantries & columns, material handling axis drives, zero-backlash axis drives and digital line shafting. Industries offered include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors have a torque range of 92 Nm to 520 Nm. As angular drives they are specially space-saving and reduce the expenditure for valuable installation space.
The helical-worm servo gearmotors were created so that they guarantee you a low-noise system environment. Moreover, these gearmotors give you exceptional attenuation properties for the procedure of your systems with low degrees of vibration. This is usually due to the longitudinal application of pressure on the input shaft. This enables torque impulses to end up being prevented successfully and for maximum results when it comes to running smoothness and noise reduction to be achieved.
Both the gear unit, and the synchronous servomotor are based on our modular system. This enables you to have completely individual configuration possibilities for each application. One factor is for certain – Our servo gearmotors are true specialists for very specific requirements.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right angle gearboxes, quickness reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement when a gear in the form of a screw, also called a worm, meshes with a worm gear. These gears are typically made from bronze and the worms are metal or stainless steel.
While worm gears are similar to a spur gear, the worm gearboxes are considerably smaller than other equipment reduction boxes. A main benefit of worm equipment reducers is certainly that they create an output that’s 90° from the input and can be utilized to transmit higher torque or reduce rotational speed. Most often, a worm gearbox has right hand threads; to change the direction of the output, a left-hand thread worm gearbox is necessary.
At times a motor’s capability could be limited to the main point where it needs gearing. As 
servo producers develop more powerful motors that can muscle applications through more difficult moves and generate higher torques and speeds, these motors need gearheads equal to the task.