We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 distinct branches. For more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Feature
- Torque measurement
- Energy and signal non-get in touch with transmission, output signal digitalized ( additional manner necessary)
- Is made for each static and dynamic torque measurement
- The sign transmission is impartial of the calculated item rotates or not, no make a difference of the rotation pace and rotation route.
- There is no amassing ring or EPT ware parts, can undertake prolonged time working in high speed .
- Substantial precision, great stability, tiny dimension, light-weight fat and effortless to set up
- Optimistic and negative torque signa EPT can be continuously transmitted with no repeated zero cleansing
- EPT anti-interference overall performance
- It can be put in in any placement and any route
Solution instruction
MRN-01 employed for measure torque price. Considering that the output is sq. wave frequency signal (an EPT module can be additional to output 4-20ma current signal or voltage signal), powerful anti-interference capability and easy to use. Sensor is transformer induction electricity supplied, can bear prolonged time working, extensively utilized in measurement of pace and torque of motor, generator, draught enthusiast, aircraft, mine market, reducer, ship, diesel engine.
Principle of operations
Measure : The input shaft and output shaft are related by a torsion bar, with splines on the input shaft and keyways on the output shaft. When the torsion bar is twisted by the torque of the steering wheel, the relative situation amongst the spline on the enter shaft and the keyway on the output shaft is modified. The relative displacement of splines and keyways is equal to the quantity of torsion of the torsion bar, resulting in a alter in the magnetic depth of the spline, which is transformed into a voltage sign through the coil. The large frequency part of the sign is filtered by the detection circuit, and only the torque sign portion is amplified. Non-speak to torque sensor adopts non-get in touch with operating mode, so it has a extended lifestyle, large dependability, and is not easy to be attrited. With less delay, less influenced by axial deflection and axial deviation, it is now extensively utilized in vehicles and light-weight vehicles.
Instrument parameters
| Capacity | ~±5Nm,~±(10,20,fifty,100,five hundred)Nm, ~±(a thousand,2000,5000,10000,20000)Nm |
| Accuracy | <±0.5%F·S,<±0.3% F·S,<±0.1%F·S,(selectable) |
| Frequency reaction | 100μs |
| Nonlinearity | <±0.2%F·S |
| Repeatability | <±0.1% F·S |
| Hysteresis | <0.1% F·S |
| Temp. impact on output | <0.2% F·S |
| Temp. Influence on zero | <0.2% F·S/10ºC |
| Output impedance | 350Ω±1Ω,700Ω±3Ω,1000Ω±5Ω(selectable) |
| Insulation impedance | >500Ω |
| Static overload | one hundred twenty% one hundred fifty% two hundred%(selectable) |
| Secure temp. selection | -10ºC~50ºC |
| Storage temp. | -twenty~70ºC |
| Power offer | ±15V±5% |
| Power usage | <200mA |
| Frequency signal output | 5kHz-15kHz |
| Rated torque | 10kHz±5kHz |
Link techniques
Torque sensor link with power gear and load equipment
(1) Elastic pin coupling relationship: This relationship method is straightforward structure, effortless manufacture and preserve. It can compensate the relative deviation of shaft induced by set up mistake, it also has slight damping effect. Suitable for high or minimal speed procedure with reasonable load and recurrent start off-up, doing work temperature -20~60ºC.
(2)Rigid coupling connection: This sort of connection has the advantages of straightforward structure, minimal value, but no payment, no damping and the two shafts question for high installation accuracy. For doing work circumstances with little vibration.
Set up
- The horizon set up
2.Vertical set up
Dimensions
Observe: The details is for reference only. The detai EPT are subject to orders
We are a Chinese Manufacture of load cells, torque sensors, pressure sensors, multi-axis sensors and relevant instruments and software, which is established in 2011. Our goods are Unique Developed FOR Weight A EPT Drive MEASUREMENT in this sort of diversified applications as process management and manufacturing unit automation. EPT purposes exi EPT in numerous fields of science and market for our load cells. SZOBTE materials te EPT and measurement items to several industries, specially healthcare, robotic, and aerospace.
And also offer numerous varieties of automation solutions created by our company, these kinds of as follows:
We welcome the existence and direction of each and every new and aged consumer. SZOBTE is your trustworthy partner!
Hope to create Acquire-Get romantic relationship with your esteemed company in the near long term!
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 various branches. For much more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic gear manufacturer’s (OEM) portion numbers or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating merchandise use and compatibility. Our firm and the shown alternative areas contained herein are not sponsored, approved, or produced by the OEM.
