The 14 sizes of regular roller chains are available ranging from 25 to 240 which include those in conformity with ANSI (American National Regular Institute), and ISO (Worldwide Organization for Standardization).
The chains not simply meet the necessities for your Pipeline centrifugal pump&slow rotary velocity centrifugal pump minimum tensile strength prescribed by ANSI and ISO, but they also give the top rated class top quality in the planet together with a substantial fatigue strength
Ideal employs
?General use for driving and lifting gear.
Examples
?Driving transfer units and various products. For multilevel parking.
Selection of chains
For variety of a chain, see the tables of “Max. Horsepower Ratings” for standard roller chains and “Designing of Chain Transmission”. Having said that, only to get a distinctive case of minimal speed and significantly less shock, “Low-speed selection” technique can also be referred to.
Conventional roller chains up to five strands are available. The standard system for connecting pins and plates is rivet form (RP).
The cotter kind (CP) is accessible for typical chains and HK chains of 80 or bigger.
Sprockets
The common roller chains may be engaged with typical sprockets of the corresponding nominal numbers. For sprockets, refer towards the table of “Dimensions” for each size of chain.
Connecting back links and offset links
For connecting links and offset backlinks, refer towards the table of “Dimensions” for every dimension of chain.
The connecting backlinks are commonly R or C connecting links in which the pins 
are clearance-fitted with all the connecting plate. Considering that clearance-fitted back links are inferior towards the base chain in Max. allowable stress as inside the situation of one-pitch offset hyperlinks (OJ), “Low-speed selection” cannot be referred to. Because the Max. kilowatt ratings are made a decision thinking of the strength of connecting hyperlinks and OJ, the clearance-fitted connecting hyperlinks and OJ may be employed if the chains are picked according on the “General selection”. When a increased Max. allowable tension is required for your connecting link, make use of the interference-fitted connecting link (H connecting website link) of the HI-PWR-S chain, and inside the case of offset backlinks, use 2POJ.