For Use in Conditions Exposed to Water or Sea Water Drops
When chains are exposed to rainwater or sea water drops, lowering of power and brittleness by corrosion, sudden dress in, bending failure by rusting and roller rotation failure etc. arise. In this kind of cases, based on the situation, stainless steel or substantial guard chains or chains with stainless steel elements are advised. The substantial guard chains are extremely rated by our customers. For making use of chains below water, see the next “For 
In-water Use”.
For In-water Use
When utilizing chains in water or sea water, brittle fracture and corrosion need to be taken into consideration as well as the adverse situations stated from the above segment. For this goal, we manufacture Water Therapy Conveyor Chains like Traveling Water Screen Transfer Chain, Rake Chain, Sewage Treatment Chain, BT Bushing Chain for Water Remedy Drive Unit. Chains with stainless steel components, with specially coated plates or stainless steel chains are suggested. Additionally, as corrosion resistant bearings which might be made use of in-water, stainless steel, Diesten and Diemec bearings can be found.
For Use in Acidic or Alkali Environments
In acidic or alkali environments, tension corrosion, hydrogen embrittlement, intergranular corrosion, and so on. are triggered along with widespread complications encountered in other corrosive environments. Section “5-4 Corrosion Resistance Against Many Substances” lists the corrosion resistance of chain materials to various substances.
Especially, elements made from 13Cr stainless steel could rust dependent on conditions.
Lubrication
Chain daily life is extended by periodical lubrication. Lubrication also decreases the needed energy. On the other hand, note that, below some services ailments, lubrication may possibly adversely impact the chain, or be regulated by law, and so on.
?Lubrication intervals
It is a general rule to lubricate about when every week, but based on the situations all through operation as well as the state of lubricating oil, lubricate as desired.
As lubrication techniques, coating or drip lubrication is encouraged. As for your areas of lubrication, see the following illustration.
For productive lubrication, clean the chain just before lubrication. Decide on a lubrication strategy ideal for that precise service situation.
?Automated lubrication (oiling) gadget
We now have many automatic lubrication (oiling) gadgets. Talk to us when you are employing chains within a setup where lubrication is tough or for those who prepare to automate lubrication.
When Lubrication Is just not Attainable
Lubrication is totally needed for extending the lifestyle in the chain. Even so, underneath some situations, lubrication may not be useful.
Keep away from lubrication while in the following instances:
one) The chain is embedded inside the loads (granular material, powder, and so forth.).
two) Granular material and powder deposit to the chain when carried by pan or apron conveyors. Right here, lubrication operates adversely.
three) The chain temperature gets large.
4） Problems by which lubrication is prohibited by laws or laws.
Once the chain cannot be lubricated or is being used to convey foods, we suggest working with our resin, oilless or stainless steel bearings.
For Use with Food
When employing chains for driving or conveying inside of a meals processing machine, specially when the foods immediately contacts the chain, stainless steel is required by FDA rules.
Stainless steel chains (S3) made of 18-8 stainless steel are suggested. We also manufacture chains with neat appearance that give a clean impression developed specifically for use with meals products. Contact us for much more facts.