Standard Description
Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is intended to operate materials handling products. The decreasing motion is 
achived by the solenoid valve together with the lowering pace managed by an adjustable needle valve. The left and proper functions are outfitted using a dual pilot operated examine valve and cross-over relief valves.
Remark: Please talk to our income engineer to the diverse pump displacement, motor electrical power or tank capability.
Particular Notes
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned in advance of installation of the power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of impurities.N46 hydraulic oil is advised.
four. This power unit must be mounted horizontal.
5. Check the oil level from the tank after the first get started of the electrical power unit.
six. Oil shifting is required soon after the first a hundred operation hrs, afterwards once just about every 3000 hours.