ANSI-CERTIFIED ROLLER CHAIN SPROCKETS
Industrial chain sprocket breakages may bring your machinery to a grinding halt. Many devices can’t operate without their drive train sprockets, and changing them can cost a lot of time and cash. Additionally, the overall performance of a conveyor or drive depends on sprocket-chain conversation. Using the right sprocket is simply as important as deciding on the best chain. 
We’re positive you’ll be happy when you buy industrial chain sprockets inside our shop, because they’ll last you quite a long time. If you’re not sure what sprockets are the ones you need for your machine, please don’t hesitate to give us a contact. Our knowledgeable staff, excellent products, and unbeatable prices will be the known reasons for our A+ BBB ranking!
SINGLE STRAND ROLLER CHAIN SPROCKETS
There are six different standard styles of sprockets for single strand roller chain. We stock a complete line of each type! Our regular one strand roller chain sprockets are produced with hardened tooth (for tooth counts under 30), used premium quality SAE 1045 steel material, and are completed with black-oxide for corrosion resistance.
To start shopping simply choose what chain size you are using with your sprocket. Next select the type needed, finally select the preferred tooth count and possible accessories needed, you then are ready to obtain your sprockets! If at any point you have queries or trouble finding or choosing your sprocket please contact our customer support department and we will be happy to assist you.
DOUBLE SINGLE SPROCKETS
Double single sprockets are made to run two single-strand type roller chains, that’s where the name “double single” originated from. Typically these sprockets certainly are a design but both BTB taper bushed and QD design is available from stock. Our double solitary sprockets are produced with hardened tooth and have a dark oxide coating for superior performance and a slight corrosion resistance. Share sizes of double one sprockets range from ANSI #40 – #160 but additional sizes could be manufactured upon demand. We can also supply quick response custom re-bores and MTO specialty double single sprockets because of our quick reaction in-house machine shop. Something important to note is that even though these sprockets are double sprockets they will not double-strand roller chain. The charts below display the in-stock double single sprocket sizes and also have clickable links to the product pages themselves.
ROLLER CHAIN SPROCKET NOMENCLATURE
Different sprocket manufactures use different “terms” or nomenclature to spell it out their sprockets. Though, throughout the general background of roller chain sprockets nearly every manufacture utilizes four different types of sprockets and has used the same nomenclature for them.
STANDARD SPROCKET STYLES
Style A, also called A-Plate or simply “plate sprocket” is definitely a set sprocket plate-wheel with no hubs that extrude on either side.
Style B, also known as B-Hub sprockets is a sprocket with a hub that extrudes on one side.
Style C, also referred to as C-Hub sprockets is certainly a sprocket with a hub that extrudes on both sides.
Style D, is a sprocket with a detachable bolt-on hub mounted on a plate.
MULTI-STRAND ROLLER CHAIN SPROCKETS
Multi strand roller chain sprockets will start with a prefix except when previous 4-strands. We supply single through twelve (12) strand roller chain sprockets in the four standard styles and also several other styles upon request.
D – Double Roller Chain Sprockets/ Duplex Sprockets
E – Triple Roller Chain Sprockets/ Triplex Sprockets
F – Four Strand Sprockets/ Quadruple Sprockets
DS – Double Solitary (these sprockets are created to run two single-strands of roller chain aspect parallel to one another)
COMMON SPROCKET STYLES
QD style sprockets, also referred to as “quick detachable” utilize a tapered bushing that is bolted in to the bore that’s machined in the sprocket. When the bushing is certainly inserted into the sprocket is definitely compresses onto the shaft, which provides a tight grip.
Taper Bushed sprockets, commonly designated with TL, BTL, CTL, TB, BTB, or CTB is another design of interchangeable bushed sprockets that provides a positive grasp on the driven shaft.
Shear Pin sprockets make use of a shear pin type hub that is bolted to a sprocket to provide an overload device. If the torque ranking can be exceeded the shear gadget disengages the sprocket from the drive.
Split type roller chain sprockets are produced for quick installation with no disruption of the shaft and alignment.
SPROCKET PART NUMBER NOMENCLATURE
When identifying a sprocket with a part number, standardly the chain pitch will be written first, then the hub design or code, and followed by the number of tooth the sprocket has. If the sprocket can be multi strand there will frequently be considered a letter prefix at the beginning of the part quantity.