Material Handling Energy UNIT one
This power unit is developed for the fork lift marketplace, consisting of highly effective gear pump, DC motor, guide raise and lower valve, tank, ect. The up and down motion are managed through the lever with the guide release valve, that’s equipped with an electric switch to activate the motor. The lowing pace is controlled by the pressure compensated movement handle valve.
one. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean the many hydraulic elements concerned just before set up of the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which should also be clean and free of charge of impurities, N46 hydraulic oil is encouraged .
4. Oil altering is needed following the initial a hundred operation hours, afterwards after each and every 3000 hours.
five. The energy unit proven is created to be mounted horizontally.
Material Handling Electrical power UNIT two
This energy unit capabilities power up gravity down circuit. Activate the start out solenoid to start the motor to lift the machine. The lowing motion is activated by the solenoid valve using the lowering speed managed by the pressure compensated movement manage valve. Items of this series is often extensively utilized in the business of logistic devices for example fork lift, mini lift table, and so on.
1. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean all of the hydraulic components concerned in advance of mounting the power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst,which must also be clean and free of charge of impurities, N46 hydraulic oil is advised .
4. Oil changing is required after the first 100 operation hrs,afterwards as soon as each 3000 hours.
5. The electrical power unit ought to be mounted horizontally.