Single and double hydraulic planetary drive reduction planetary gear drives to be used with electric, hydraulic, atmosphere motors or mechanical power input from high velocity, low torque sources to deliver decreased speeds at increased torques. The input side has regular SAE pads for electric motor mounting. Available in the three result configurations shown below. Many units could be furnished with an integral parking brake.
Solitary reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input rate is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For constant operation reduce torque rankings to about 1/3 to 1/2 the values shown. Devices provide 95% power transmitting efficiency.
Input side has regular SAE pads and splined insight. Output side has hub for mounting automobile wheel. Free wheel is possible by using the springtime disconnect to disengage the drive shaft. The disengage feature is usually regular on all wheel drives.
Input side regular SAE pads with splined input. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.
Input side is standard SAE pads with splined insight. Output side has a flanged spindle for coupling to the load.
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel provides extra-large tapered roller bearings, a ductile iron hub and warmth treated ring gear to minimize backlash growth caused by wear. The exterior bearing nut provides the ultimate in shaft retention and shaft strength. Output could be a spindle shaft or numerous sizes of integral pinion gears.