Helical-worm gearmotors
Due to their style and from being combined with a helical gear stage, the helical-worm gearmotors S..DR.. have especially high efficiency. They are also extremely low-noise and therefore avoid high sound emission levels.
Low-noise continuous operation: equipment unit combination optimized regarding efficiency
Do you expect a drive option to impress you with its high level of performance and efficiency? If so, we would recommend our high-quality helical-worm gearmotors EP to you. These could be implemented individually in the modular program. In this way, they offer you a massive range of sizes, gear ratios and motor sizes.
However, their greatest strength can be their running smoothness and their extremely low noise development. One thing is certain – With the helical-worm gearmotors EP you are choosing a robust drive solution that you will hardly also hear.
The overall concept offers you many more practical product characteristics and benefits. These include the significantly higher effectiveness of the helical-worm combinations instead of single helical-worm gear models. This is one way you save extra energy in the procedure of your systems and so are in a position to noticeably reduce ongoing working costs.
You will receive the low-noise helical-worm gearmotors EP. – to fit your individual requirements – with an array of AC motors. Furthermore, you can freely configure all the relevant properties. In this way, you can effectively utilize all the benefits provided by this combination of low-noise helical-worm gear unit and performance-optimized electric motor. Even greater variance can be achieved thanks to the optional flange or foot-mounted design and by choosing between solid and hollow shaft.
Save time and money
By opting for one of our gearmotors, you already are saving time and money with this selection and task planning. It is because our modular system allows a multitude of combination options for gear products and motors. You can for that reason reduce operating costs, depend on a long service life and reap the benefits of simplified maintenance that is characteristic of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than single helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm gear units of series EP
AC motors
Combine the helical-worm gear unit with this AC motors:
Characteristics
Quiet and reliable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm wheel provide exceptional sturdiness and lengthy service life.
Optional durable bearings deliver high radial and axial load capacity
High strength cast iron housing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminium alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Available in footed, shaft mount or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear devices are helical/helical-worm combinations, so they are better than normal helical-worm gear units. Due to their outstanding performance, these drives can be utilized in every commercial sector and tailored to person torque and quickness requirements. The reduction ratios afforded by the helical-worm gear stage and the reduced noise levels during procedure make these gearmotors ideal low-cost solutions for simple applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Because of the unique combination of optimized worm wheel materials with unique lubricants, optimized form, this powerful engine achieves high levels of efficiency and torque. The casing machined on all sides enables diverse mounting options. Double chamber shaft seals are utilized as standard.
The low contour design makes it suitable for implementing applications e.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – an especially essential feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Course 12 Helical and hardened and ground worm gears: Provides higher efficiencies and better torque capacity in smaller sizes.
Multiple Input Options: Integral gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft installation, inch and metric output shafts, mounting pilots and flanges provide an array of design solutions.
UNIBLOCK Housing: For optimum rigidity universal installation on five sides or with a torque arm.
Sealed for Washdown: Continues contaminants and water out.
Worldwide Motor: Multiple leads and windings for globally multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or forced cooling.
EP equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors arranged new requirements for reliability, performance and economic climate with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly design provides for easy integration right now and a future proof solution. The EP gear electric motor offers total flexibility in mounting choices includes shaft, base, face, and flange solutions. The electric motor terminal box can be mounted in option positions helical worm gear motor rotated in 90º steps around the engine frame providing for unparalleled integration opportunities.
EP gear motors comply with UNITED STATES and International specifications, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a true total option for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series is definitely dirt tight and hose proof,and can be used outdoors or in wet and dusty conditions without the utilization of additional enclosures. Complete rated output is available at the output shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Additional features:
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Due to the unique mixture of optimized worm wheel materials with particular lubricants and optimized shape, this powerful geared motor achieves high levels of performance and torque. The reduced contour design makes it suitable for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – a particularly important feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a broad selection of compact, heavy duty helical gear drives with extended life performance features and simplified maintenance. The utilization of condition of the artwork helical and worm equipment combinations affords optimum efficiency fulfilling a wide variety of ratio requirements. The 800 BR is usually functionally interchangeable with the majority of major manufacturer’s drives.
SPECIFICATIONS
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All models shipped pre-lubed for your particular installation position with KluberSYNTH UH1 6-460
Obtainable in NEMA C-face flanged and immediate input
Projecting and hollow result shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting output shafts
Dual and triple reduction ratios
Flanged or foot mounted
All devices adaptable to ground, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared engine. A favorably priced alternate for the standard duties expected of a right-angle drive.
5 gear sizes (S0 to S4).
Electric motor power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors available with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC motor are directly flange mounted, the pinion is on the engine shaft. This integrated compact design can be an essential element for the high accuracy and the incredible stiffness of EP geared motors.
For vector-controlled inverter operation utilization of an incremental encoder is provided for as regular.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The amount of efficiency in Ever-Power powerful worm gearboxes and helical worm gearboxes is more than 90%. All worm shafts are produced from case hardened alloy steel and the flanks are precision ground. The worm tires are made from special wear-resistant bronze. Helical worm gears are equipped with a helical equipment. Worm gears with shrink disc, torque limiter, as well as adjustable backlash styles are also part of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Overall performance gearboxes in universal design. The housings are made from top quality cast iron. The rugget walls and inner ribbing ensure extremely torsional stiff and noise dampening housings. The exterior ripping offers a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with rugged walls and internal ribbing
Intense torsional resistance and low noise
Case hardened worm shafts and worms with precision floor flanks
Worm wheels created from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes equipped with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available because solid shaft or hollow shaft
Shrink disc, torque limiter,in addition to adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG