The EP Greenhouse reducer is a compact and lightweight reduction gear reducer with a limit switch system that’s ideal for assembly of a locally available electric engine. The gear motor is utilized in manually-managed or climate-controlled ventilation and screen systems in greenhouses. The 
quick and easy-to-install EP gear reducer is definitely rainproof and windproof. The gear reducer has a high protection course (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise reducer for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmitting ensures that the drive shaft is definitely locked when the decrease gear driver is not running. The completely sealed reduction gearbox has an growth chamber with a diaphragm to keep the gear oil at a minimal pressure under all circumstances, even at high temps. Thanks to the usage of an expansion chamber, the gear driver can be installed in any placement. There are no limitations, since there is no dependence on a bleed plug. The sealed reduction gear reducer keeps the gear essential oil of the gear driver in optimal condition for its entire operating life time. The geared motor is ideal for discontinuous use, operating course s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction geared motor has an FT85 motor assembly flange, to which a suitable IEC standard motor can easily be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed within an included chamber and is certainly enclosed by an impact-resistant plastic-type material cover. The limit switch system is obtainable and simple to adjust. The limit switch system’s optimum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear driver comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The reducer for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of app of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).