Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Surroundings Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric engine, capacitor and quickness control change is still hooked up however the cord itself is generally detached as seen in the photos. (Discover “Control Notice” below for change type.)
T (See “App Notice” below for utilize in a variety of other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” lengthy with a collection screw even. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with electric fan motor china washers and nuts. The studs appear to ‘ve got 4mm threads and also to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric powered motor) is Clockwise.

Control Take note: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you possess a rotating knob and you have got a pull-chain). If you order several engine at the same time, we can do our better to supply your order with each one kind of control or the additional.
Application Note: USUALLY DO NOT use this electric motor in a nonfan application. This is a completely enclosed fan electric motor and designed to have continuous ventilation over the engine casing for cooling. The casing isn’t vented and the electric powered motor will overheat and enter automated thermal overload if operate in a nonfan plan where there isn’t solid ventilation past the engine. (Caution Note: the electrical motor will restart instantly when it cools back off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans may possibly also overload the motor and cause it to proceed into automatic thermal overload. (Your lover blade from another manufacturer may possess a steeper blade position.)
Origin: This electric motor is produced in China.