DUMP TRAILER Energy UNIT- SINGLE ACTING
Standard Description
This energy unit includes a electrical power up gravity down circuit. Start out the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve could be presented if expected. Also a strain compen sated flow control might be extra for the circuit to manage the descent speed from the cylinder.
Remark: Please consult our product sales engineer to the diverse pump displacement, motor energy or tank capability.
Unique Notes
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned just before set up of the energy unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst,which should also be clean and absolutely free of impurities.N46 hydraulic oil is advisable.
4. The electrical power unit must be mounted horizontally.
5. Check the oil degree during the tank soon after the first operating of the energy unit.
6. Oil altering is needed following the first 100 operation hours, afterwards the moment every single 3000 hrs.
DUMP TRAILER Electrical power UNIT-DOUBLE ACTING
General Description
This electrical power unit includes a power up energy down circuit with load holding on each A & B ports. A pressure compensatred movement control might be extra to circuit to regulate the decent velocity from the cylinder.
Special Notes
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned just before set up of the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which must also be clean and cost-free of impurities. N46 hydraulic oil is recommended.
4. The energy 
unit must be mounted horizontally.
5. Check the oil level from the tank just after the first running from the power unit.
6. Oil altering is needed after the preliminary one hundred operation hours, afterwards once each 3000 hours.