A chain and sprocket drive is a kind of power transmission in which a roller chain engages with two or more toothed wheels or sprockets, used in engines as a drivefrom crankshaft to camshaft.
Ever-electric power is proud to inventory a wide selection of Sprockets along with this huge selection of agriculture, gardening, preparing food and outdoor products. We stand behind all 26,000 items we sell with our Satisfaction Guarantee. CUSTOMER SUPPORT may be the cornerstone of us business, and has been for over 50 years.
Ever-power drive sprockets provide durable, reliable service and show replaceable tooth plates for easy field protection. Tooth plates for 102 and 142 series chain are available with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL in addition to the 175 and 260 series use our nonsymmetrical profile.
Drive sprockets weren’t always made to be bolted about. At one time these were welded onto the ultimate drive motor and had to be cut off when they were replaced. Finally, welded-on adapters were installed that allowed the sprocket to be bolted on, and more modern designs utilize the bolted approach altogether.
When someone sends in your final drive motor for us to look into or?rebuild/reman, we advise them to remove the sprocket. We don’t need the sprocket in location to evaluate the engine and the added excess weight (and this can be significant) unnecessarily boosts your shipping costs.
Signs of Sprocket Wear
The teeth on a travel sprocket are where you search for wear . They should be tall and smooth by the end, not sharp or dished by the end. And the sprocket, and more specifically its teeth, begin to wear, its size becomes smaller. This causes what’s known as a pitch mismatch, where the pearly whites on the sprocket no longer connect to the track links as effectively. This may accelerate the don of the sprocket and reduce the efficiency of your tools.
If your sprocket shows sign of excessive wear, then its time to replace it before it starts to cause abnormal track wear or commences to negatively affect the performance of your final drive electric motor.
Preventing Sprocket Wear
One of the key ways to prevent accelerated sprocket don is to check the track stress. If the tension is too tight, it will cause use on the sprocket pearly whites. We’ve talked before about the value of keeping the undercarriage clean, and the health of the undercarriage make a difference the track tension (especially if there is usually a build up of dried mud and particles). That’s the main motive we put so very much focus on keeping the undercarriage clean
Without a functioning drive sprocket, your track drive won’t have the ability to propel your equipment. Fortunately, there are ways to help your drive sprocket last longer: keep carefully the track stress at an effective level and preserve your undercarriage clean.
The undercarriage of your track machine should be inspected regularly. If you find early wear or damage to your tracks, a donned sprocket could be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the following Bobcat Compact Monitor Loaders: T180, T190, T550, T590
Parts can vary according to your serial number.
All Ever-power sprocket tooth profiles are induction hardened to 55 Rockwell C., and so are replaceable. The alternative and protection of tooth plate segments does not require removal of the travel shaft, bearings, etc. Ever-power also designs custom split hub parts for retrofit applications that minimize discipline labor costs.
At 1st glance, you might feel that if you’ve seen one drive sprocket, you’ve seen all of them. However, Ever-power features added an I.D. lip and spiral band that captivate the needle bearing along with an exterior snap ring that increases performance and stability. While easy to overlook, it’s this focus on detail that the racer offers come to expect from Ever-power.
An I.D. lip and spiral band that captivate the needle bearing
Exterior snap ring caps sprocket on drum & increases durability
CNC-machined teeth feature a corrosion-resistant finish
Chain Type: #219
Tooth Configuration: Standard