Worm Gear Velocity Reducers: Double Reduction
Ever-Power. manufacturers double lowering Worm Gear reducers that are designed to last. Double decrease units are created with the same top quality parts as the single decrease Worm Gear reducers.
Double Lowering Worm Gear Speed Reducer Features
Cost effective
High Reduction: 75:1 – 3600:1 and higher
C-face input or stable shaft input
Mix of two single reduction reducers
Solid or hollow output shafts available
Several varieties of bolt-on bases available
Excessive tensile strength cast bronze worm wheel and a hardened and ground alloy steel worm made integral with the shaft for longer and trouble-free life
All cast iron construction
9 Models: I, IC, IS, ICS, IM, IMS, ISF, ICSF, IMSF
Double Lowering Worm Gear Quickness Reducer Applications
Packaging Machinery
Cranes/ Hoists/Winches
Mixers/ Agitators
Shipping & Delivery
JIT delivery
Standard shipping: 3-4 days
Same/next day shipping on stock goods at no additional
Double reduction gearing mechanism is employed in large machinery and automotives where in the speed needs to be lowered at a required level. For eg if the suggestions speed is definitely 2000rpm and the output rate desired can be 300rpm a reduction gearing device is used such as a reduction gear container. However in case of dual reduction mechanism, the reduction of speed occurs in 2 steps. In the beginning the suggestions from the engine shaft has a pinion mounted onto it through couplings. This pinion equipment is then linked to an intermediate equipment which is first reduction gear. This gear is then connected to another low rate pinion on another shaft. This low rate pinion is linked to the second reduction gear which is attached on the propeller shaft which may be the output.
Greaves Double Reduction Quickness Reducers are two stage worm reduction models. A specifically designed primary worm reduction unit is integrally attached on a standard single lowering Greaves worm reducer which varieties the second stage. The composite models provide the most small and rigid arrangement for large reduction of speed necessary for slower shifting machinery. A wide range of ratios upto 4900:1 is available.
The wormshafts are constructed with top quality case hardening steeL accurately double reduction gear reducer generated, ground and superfinished. The wormwheels include phosphor bronze centrifugally cast rims of considerable sections welded to rigid centres. Considerable versatility of shaft layout is normally permissible with all types of Double Reduction units
Ever-Power Double Lowering Worm Gearboxes will be two level worm reduction units.
A specially designed primary worm lowering unit is integrally mounted upon a standard single reduction AGNEE worm gearbox which forms the next stage. The composite models provide the most small and rigid arrangement for large reduced amount of speed necessary for gradual going machinery. A broad range of ratios up to 4900:1 is available.
Double Decrease Worm Gear Container Sizes Available around are 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430.
Nominal Gear Ratios: 100:1, 150:1, 200:1,300:1, 400:1, 600:1, 750:1, 1000:1, 1200:1, 2000:1, 2800:1
Nominal ratios listed certainly are a typical selection of commonly used ratios from the entire range of Ever-Power Twice Reduction Worm Gear Box. Details of other ratios on request.
Under Driven / Over Driven / Vertical Input or Output Shaft Release / Shaft Mounted Version / All types with motor installation adaptor /
motor – optional
The worm shafts are constructed with high quality case hardening steel, accurately generated, ground and super finished. The worm wheels comprise of phosphor bronze centrifugally cast rims of considerable sections welded to rigid centers. Considerable flexibility of shaft layout is usually permissible with all types of Double Reduction products.
Product Description
The products are widely applied in the generating equipments of all sorts of industries domestic and overseas. They are the best options for nowadays modern establishments of mechanical reducing drive control to know large twisting distance, significant gear ratio, low sound, high effectiveness and low temperature.
Customized top quality double worm gear acceleration reducer aluminium gearbox decrease gearbox with electric motor
Blue, Silver Or while customer’s requirements
low noise (<50DB)
Great Efficience and low noise and low temperature
Housing: Die-Cast Aluminum Alloy
Worm Gear-Bronze 9-4#
Worm-20CrMnTi with carburizing and quenching, surface area harness is 56-62HRC
Shaft-chromium steel-45#
Carton and Wooden Case
C&U Bearing
One Year
Input Power:
0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw
Industrial Machine: Food Stuff, Ceramics, Chemical, Packing, Dyeing,
Wood working, Glass.
IEC Flange:
56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Synthetic & Mineral