Any harm on the teeth surfaces of the sprocket diminishes the existence of your conveyor chain.
With conventional sprockets, substantially worn sprocket teeth have been repaired by teeth padding or even the whole sprocket was replaced. In both case, restore was expensive and with teeth padding, accuracy was impaired. We created new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our buyers for the dramatic cost savings in value and time.
The teeth is usually replaced by two solutions: person tooth substitute or sectional teeth replacement.
The bolts and nuts employed for mounting the teeth on towards the sprocket are spot-welded to stop loosening.
The respective structures are illustrated about the ideal.
The above photo as well as the top rated appropriate illustration show a sprocket for person tooth substitute. Since the joint encounter among the replaced teeth and also the sprocket is formed in the unique arc, the bonding accuracy is high and the sprocket strength is enhanced. On top of that, because the load acting over the mounting bolts is decreased, there is certainly significantly less likelihood of loosening. This sprocket development is patented.
There are two types of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are made use of for huge sprockets obtaining hefty loads and welded sheet steel hubs for other applications.