With many years’ experience in these lines, we have been distinguished from other suppliers in China by our advantages in competitive pricing, on-time delivery, prompt responses, on-hand engineering support and good after-sales services.
Overview
Quick Details
- Applicable Industries:
-
Manufacturing Plant
- Brand Name:
-
OEM
- ITEM NO:
-
SYF
The worm is made of casehardened quenched steel, with ground-on teeth sides, and the wheel is made of DIN (GZ-CuSn 12 Ni2) centricast bronze, melted on steel. Due to the quality of these two parts mechanical features, this series offers excellent performance and low noise levels.
- Model Number:
-
BWD/BLD
- Product name:
-
BWD1 cycloid gear reducer
- Application:
-
Mining Plant
- Material:
-
45C Steel
- Certificate:
-
ISO9001
- Ratio:
-
11~87
–Driven (outer) yoke same as drive yoke but is mounted on the implement. There are two types of shafts, domestic and metric, which are identifiable by their shapes. Domestic are generally one of four shapes: round, square, rectangle or splined. Metric are: bell, star or football shaped. In either case the primary (front) shaft is the same shape as the secondary shaft, only bigger so that the secondary shaft fits inside. This allows a telescoping effect to take place when the implement is raised on the 3 pt. or during a turning movement such as a bailer. All shafts have to be sized before use. Attach the implement to the 3 pt. and raise and support it. Attach the proper end to the tractor and attempt to attach the other to the implement. If the shaft is too long trim one of the shafts with a hack saw and try it again until it fits. This allows for the implement to be raised without binding. The shafts should overlap as much as allowed.
- Bearing:
-
NSK
- Mounting Position:
-
Horizontal (foot Mounted)
- Output torque:
-
2.6-1195N.M
Packaging & Delivery
-
Lead Time
: -
Quantity(Pieces) 1 – 10 >10 Est. Time(days) 3 To be negotiated
Online Customization
Product Description
Cycloidal gear reducer is a principle adopted K-H-V Planetary Gear less innovative gear. Its transmission process as follows : input shaft equipped with a 180-degree dislocation of the double eccentric sets, replaced with two eccentric turn as a roller bearing arm, the formation of H-, two cycloid round hole at the center shall uplink Eccentric Roller Bearings arm, which cycloidal gear needle round and meshing phase, comprising a difference of the teeth meshing with the gearbox.
Type |
stage |
Model |
Ratio |
Nominal Power (KW) |
Nominal Torque(N.m) |
X/B Series Cycloidal Reducer |
Single reducer |
B09/X1 |
9-87 |
0.55-0.18 |
26-50 |
B0/X2 |
1.1-0.18 |
58-112 |
|||
B1/X3 |
0.55-0.18 |
117-230 |
|||
B2/X4 |
4-0.55 |
210-400 |
|||
B3/X5 |
11-0.55 |
580-1010 |
|||
B4/X6/X7 |
11-2.2 |
580-1670 |
|||
B5/X8 |
18.5-2.2 |
1191-3075 |
|||
B6/X9 |
15-5.5 |
5183-5605 |
|||
B7/X10 |
11-45 |
7643 |
Type |
stage |
Model |
Ratio |
Nominal Power (KW) |
Nominal Torque(N.m) |
X/B Series Cycloidal reducer |
Double reducer |
B10/X32 |
99-7569 |
0.37-0.18 |
175 |
B20/X42 |
1.1-0.18 |
600 |
|||
B31/X53 |
2.2-0.25 |
1250 |
|||
B41/X63 |
2.2-0.25 |
1179-2500 |
|||
B42/X64 |
4-0.55 |
2143-2500 |
|||
B52/X84 |
4-0.55 |
2143-5000 |
|||
B53/X85 |
7.5-0.55 |
5000 |
|||
B63/X95 |
7.5-0.55 |
5893-8820 |
|||
B74/X106 |
11-2.2 |
11132-12000 |
|||
B84/X117 |
11-2.2 |
11132-16000 |
Main Features
All planetary cycloidal reducer rotating device can be divided into three parts:inpMain products include: manure spreading truck, potato planting/harvesting machine, disc plough, disc harrow, grass Mower/slasher, corn and wheat thershers, seeder, mouldboard plow, deep subsoiler machines, rotary tiller, rear blade, fertilizer spreader, combine rice harvester, corn thresher, farm trailer, ridger, trencher, stubble cleaner, earth auger, cultivator and its accessories: Plow disc blades, harrowing film, plough tip and share, cultivator tine, casting parts etc.ut part,deceleration part and output part.
Dislocation on the input shaft is equipped with a 180℃ of double eccentric sleeve,equipped with two ball bearings on the eccentric sleeve,the formation of H two cycloid gear center hole is the eccentric sleeve on the turning arm bearing raceway,and by a groud of cycloid gear and pin gear ring of gear meshing,less bad tooth meshing reduction mechanism to form,(in order to reduce friction,in small ratio of speed reducer,the needle with needle teeth on the gear set).
When the input shaft with eccentric sleeve rotation for a week,as a result of the cycloid gear tooth profile curve characteristics and restricted by needle on the gear teeth,the movement of the cycloid gear becoming both revolution and rotation of the plane movement,and input shaft are
made for a week,eccentric sleeve also turn the week,cycloid gear in the opposite direction around a big tooth difference reduction is obtained, then with the help pf W output mechanism,the cycloid gear rotates at low speed movement through the pin shaft,passed to the output shaft,low output speed can be achieved.
Characteristics:
1.Cycloid reducer big reduction ratio, high efficiency: a reduction gear ratio is 9~87, the two-stage reduction gear ratio is 121 ~ 5133, multistage combination can reach tens of thousands, and the needle tooth meshing line type rolling friction, the meshing surface no relative sliding, so a reduction efficiency of 94%.
2.Pin wheel reducer smooth running, low noise: the teeth contact at the same time when in operation, the coincidence degree high, stable running, strong overload capacity, low vibration and noise, a variety of models, small noise.
3. The use of reliable, long life: because the main part is made of high carbon alloy steel quenching (HRC58-62), and then grinding, and cycloid gear and pin gear set mesh transfer to the pin gear form rolling friction pair, friction coefficient is small, so that the meshing zone no relative sliding, wear small, so durable.
4. Compact structure, small volume: compared with other reducer with the power of the above weight, small volume 1/3, as is the planetary transmission, the input shaft and the output shaft in the same axis, in order to obtain the smallest possible size.
Our Company
HangZhouYinxin Electromechanical Facilities Co. Ltd
HangZhouYinxin Electromechanical Equipment Co., Ltd.is a gift enterprise integrating development, design, production and sales,Main promoting products include reducer motor,water pump,construction machinery and parts,bearings,hardware and electrical equipment,plastic products,Labour protection appliance.Our company always follow the operation concept which contains people-oriented, innovation as the soul,be prepared for danger in times of peace, unremitting……
Application area
Certifications
Sales territory